Effects of mode coupling and location of rotational axis on glacial induced rotational deformation in a laterally heterogeneous viscoelastic earth     

Patrick Wu  Hansheng Wang 《Geophysical Journal International》2006,167(2):853-859

  相似文献   

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia     

Geordie Mark  Nicholas H. S. Oliver  Patrick J. Williams 《Mineralium Deposita》2006,40(8):769-801

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.  相似文献   

Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients     

Willy Zawadzki  Don W. Chorley  Guy Patrick 《Hydrogeology Journal》2002,10(6):601-609

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication  相似文献   

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin     

Zhangxin Chen  Richard E. Ewing  Hao Lu  Stephen L. Lyons  Serguei Maliassov  Michael B. Ray  Tong Sun 《Computational Geosciences》2002,6(3-4):545-564

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.  相似文献   

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period     

Jean‐Jacques Macaire  Saïda Bellemlih  Christian Di‐Giovanni  Patrick De Luca  Lionel Visset  Jacques Bernard 《地球表面变化过程与地形》2002,27(9):991-1009

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Field Survey and Numerical Simulations: A Review of the 1998 Papua New Guinea Tsunami     

Patrick J. Lynett  Jose C. Borrero  Philip L.-F. Liu  Costas E. Synolakis 《Pure and Applied Geophysics》2003,160(10-11):2119-2146

— The Papua New Guinea (PNG) tsunami of 1998 is re-examined through a detailed review of the field survey as well as numerous numerical computations. The discussion of the field survey explores a number of possible misinterpretations of the recorded data. The survey data are then employed by a numerical model as a validation tool. A Boussinesq model and a nonlinear shallow water wave (NLSW) model are compared in order to quantify the effect of frequency dispersion on the landslide-generated tsunami. The numerical comparisons indicate that the NLSW model is a poor estimator of offshore wave heights. However, due to what appears to be depth-limited breaking seaward of Sissano spit, both numerical models are in agreement in the prediction of maximum water elevations at the overtopped spit. By comparing three different hot-start initial profiles of the tsunami wave, it is shown that the initial shape and orientation of the tsunami wave is secondary to the initial displaced water mass in regard to prediction of water elevations on the spit. These numerical results indicate that agreement between numerical prediction of runup values with field recorded values at PNG cannot be used to validate either a NLSW tsunami propagation model or a specific landslide tsunami hot-start initial condition. Finally, with the use of traditional tsunami codes, a new interpretation of the PNG runup measurements is presented.  相似文献   

September 2003     

Patrick R. Galloway 《Environmental Geology》2003,44(6):745-747

  相似文献   

The Vulnerability of the Australian Beef Industry to Impacts of the Cattle Tick (Boophilus microplus) under Climate Change     

Neil White  Robert W. Sutherst  Nigel Hall  Patrick Whish-Wilson 《Climatic change》2003,61(1-2):157-190

An integrated assessment is presented of the potential impacts of the cattle tick (Boophilus microplus Canestrini) on the Australian beefindustry under climate change. The project was carried out as a case study to test an impact assessment approach that was designed to integrate biological, production and socio-economic impacts on managed and natural systems. A climate-driven, tick population model was run for European, zebu and crossbred cattle breeds having different levels of resistance to cattle ticks. A geographical information system (GIS) was used to organise spatial data on climate scenarios and industry statistics and to undertake regional analyses.A comparison was made of the two available approaches to conducting impact assessments, namely a bottom-up approach using sensitivity analysis and a top-down approach using climate change scenarios from a global circulation model (GCM) (CSIRO, 1996). The output, in terms of the abundance of tick populations and reductions in cattle productivity for each breed showed significant expansions in potential geographical impacts. In the absence of any adaptation measures, the results indicated changes in the losses in live weight gain of cattle tick ranging from 7780 tonnes per year by 2030 to 21637 tonnes per year by 2100, in comparison with estimates for current losses of 6594 tonnes per year.The principal adaptation options available to the beef industry are to switch to breeds that are more resistant to cattle ticks, or to increase the frequency of treatments with various tick control products. In this paper we focus on switching breeds as an adaptive measure when appropriate damage thresholds are triggered under the climate change scenarios. When adaptation measures were put in place, the losses ranged from 4962 tonnes in 2030 to 5619 tonnes in 2100 compared with 2636 tonnes at present if all producers adopted the optimal breed structure. Optimal breed structure was defined as one that would prevent tick numbers per animal exceeding 100 ticks per animal for European and 700 ticks per animal for crossbred breeds of cattle in any week of the year under a tick control strategy that was suitable for present climatic conditions. The lower threshold for European breeds reflects their vulnerability to explosive increases in numbers because of their low resistance to ticks. The results of the analyses using the GCM scenarios were used in an economic model to calculate costs of lost live-weight gain for 2030, 2070 and 2100. The greatest increases in costs were incurred in the southern parts of the current distribution in Queensland and potentially in northern New South Wales if the present quarantine barrier failed.Given the great uncertainty of the nature of possible regional changes in climate, analyses of the sensitivity of losses in live weight gain to changes in climatic variables were also undertaken. The analyses included a measure of likely impacts of cattle tick on the beef cattle industry, in the absence of adaptation measures, as a baseline measure of sensitivity. The likely impacts on crossbred cattle were insensitive to the climatic variables.When adaptive breed changes were allowed, the economic impacts on the industry were insensitive to the GCM scenarios. This suggests that, at least in this instance, reducing the uncertainties in climate change scenarios is not a priority if the adaptation strategies can be implemented in a cost-effective manner. Finally we made a qualitative assessment of the sustainability and robustness of alternative approaches to adaptation and assessed regional vulnerability to cattle tick under climate change. The conclusions were so strongly dependent on assumptions about the future of other global changes, in particular the ability to maintain quarantine barriers and to retain effective acaricides at comparable costs to the present, that we strongly recommend that risk assessments of climate change extend to all relevant variables in involved in global change where possible.  相似文献   

Induced stresses and fault potential in eastern Canada due to a realistic load: a preliminary analysis   总被引：1，自引：0，他引：1  

Patrick Wu  Henry S. Hasegawa 《Geophysical Journal International》1996,127(1):215-229

  相似文献   

Measurement of natural stresses in a Provence mine (Southern France)     

Patrick Gaviglio  Pascal Bigarre  Hafid Baroudi  Jack-Pierre Piguet  Raymond Monteau 《Engineering Geology》1996,44(1-4):77-92

Stress measurements were carried out in the Arc syncline using drifs in a lignite mine. Eleven sites were investigated using the flat jack and hydraulic fracturing (or stimulating) methods. Two stress states were found to coexist, one isotropic, the other highly anisotropic. The orientations of the principal stresses are not homogeneous and an orientation ranging from E-W to NE-SW predominates locally. This does not accord with the regional stress field. The vertical stresses are systematically underestimated.  相似文献